![]() ![]() ![]() I have disabled all my drop rules same results connect but does not allow connection to shared folders. ip firewall filter add action=accept chain=input protocol=ipsec-esp comment="Allow L2TP VPN (ipsec-esp)"Are at rule order 0 and 1. The Issue is that i cannot accesses anything on the Remote side. When I do a tracert to the Remote Routers WAN IP the trace works When I do a tracert to the Remote Routers IP the trace works What happens is that the connection is made, the Client LOCAL ip is 192.168.88.2 and it gets the IP of 192.168.1.20 from the Remote Router the DNS is the Remote Routers IP of 192.168.1.254 ppp profile add name=ipsec_vpn local-address=192.168.1.254 remote-address=vpn_pool interface l2tp-server server set enabled=yes use-ipsec=required ipsec-secret= ![]() ip firewall filter add action=accept chain=input protocol=udp dst-port=500,1701,4500 comment="Allow L2TP VPN (500,4500,1701/udp)" ip firewall filter add action=accept chain=input protocol=ipsec-esp comment="Allow L2TP VPN (ipsec-esp)" ppp secret add name= password= service=l2tp profile=ipsec_vpn ip ipsec proposal set default auth-algorithms=sha1 enc-algorithms=aes-128-cdc,aes-256-cdc,aes-128-ctr pfs-group=modp1024 ip ipsec identity add generate-policy=port-override auth-method=pre-shared-key secret= peer=l2tpserver ip ipsec peer add exchange-mode=main passive=yes name=l2tpserver ip ipsec policy set src-address=0.0.0.0/0 dst-address=0.0.0.0/0 protocol=all proposal=default template=yes interface l2tp-server server set enabled=yes authentication=mschap1,mschap2,chap default-profile=ipsec_vpn use-ipsec=yes ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |